0
Owner's of the Fanimation Fan Fanimation FP4320MW1 Belleria Ceiling Fan In Matte White gave it a score of 0 out of 5. Here's how the scores stacked up:
7
How to Hang Your Ceiling Fan
Figure 11
Figure 10
Outlet Box
Hanger
Bracket
Outlet Box
Hanger
Bracket
Screw (2)
Supplied with Fan
Machine
Screw (2)
Mounting
Outlet Box
Tab
Downrod/Hanger
Ball Assembly
Figure 8
MAIN FUSE BOX
Figure 9
Floor
Ceiling
No
less than
7 ft
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advise, as it must be
grounded for safe operation.
WARNING
The fan must be hung with at least 7’ of clearance
from floor to blades. (Figure 9)
2. Carefully lift the fan and seat the downrod/hanger ball
assembly on the hanger bracket that was just attached
to the outlet box. Be sure the groove in the ball is lined
up with tab on the hanger bracket. (Figure 11)
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
To avoid possible shock, do not pinch wires between
the hanger ball assembly and the hanger bracket.
1. Securely attach the hanger bracket to the outlet box
using the outlet box screws and washers supplied with
the fan. (Figure 10)
WARNING
The outlet box must be securely anchored. Hanger
bracket must seat firmly against outlet box. If the
outlet box is recessed, remove wall board until bracket
contacts box. If bracket and /or outlet box are not
securely attached, the fan could wobble or fall.
WARNING
To avoid possible fire or shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 8)
Flat Washer
Find Your Products By Category
Please Login
