0
Owner's of the Fanimation Fan gave it a score of 0 out of 5. Here's how the scores stacked up:
3. Check the operation of the fan by gently pulling
on the pull chain switch. (Figure 19) Your fan model is
equipped with a 4-position, 3-speed, pull chain switch.
The operating sequence is as follows:
1st Pull = HIGH 3rd Pull = LOW
2nd Pull = MEDIUM 4th Pull = OFF
4. If airflow is desired in the opposite direction,
turn the fan off and wait for the blades to stop
turning. Then slide the reverse switch to the
opposite position and turn fan on again.
(Figure 20)
Operating Instructions - Pull Chain
1. Restore electrical power to the outlet box by turning the
electricity on at the main fuse box. (Figure 17)
Figure 17
2. Install the fan pull chain coupler. (Figure 18)
Figure 18
10
Maintenance
Blade Cleaning
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the ¿ nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to ¿ nish.
Periodic light dusting of the Palm Leaf, Woven Bamboo,
or Wicker blades is recommended. A feather duster will
work best.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
RECOMENDED: Periodically check that the blade arm to motor assembly hub screws are tight.
Figure 20
Figure 19
Find Your Products By Category
Please Login
