Sea Gull Lighting Fan Sea Gull Lighting Ceiling Fan User Manual

0

Out of 0 Ratings

Owner's of the Sea Gull Lighting Fan Sea Gull Lighting Ceiling Fan gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 6
 
Place blade holders onto blades aligning holes
in blade holder with holes in blade. Make sure
that the side of the blade y
ou select is facing
downward. Install 3 screws and fiber wash-
ers to back side of blade as shown. Tighten
screws securely. Repeat this process 4 more
times until all blades are assembled.
Install blades to motor using the 10
motor screws pro
vided. Tighten screws
securely.
25
26
Lift fan to mounting bracket, aligning the “L”
shape holes with the screws on the mount-
ing bracket. Turn the fan clockwise to lock
in position. Install the other 2 screws includ-
ed in hardware bag and tighten all 4 secure-
ly.
24
Remove switch cap housing from fan.
R
emove the plug of fitter. Install
switch cap housing to light kit b
y
turning clockwise to tighten.
28
Install keeper nut over lead wires.
29
Take 4 screws from hardware pack
and insert 2 one on each side of
bracket to match the L slot screw
holes in canopy. Keep 2 screws for
later use.
21
Make wire connections to power source using wire nuts
provided. Make sure that no filiments are outside of
the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on
the other side of the outlet box.
23
C
onnect black and blue wire from fan to Black or (Hot)
wire from house. Connect White wire from Fan to
White (Neutral) wire from house. Connect Ground
l
eads from mounting bracket and downrod to Ground
lead from house.
Refer to Safety Tips section of
manual.
22
House
Fan
Blue
Black
White
Green
Black
White
Ground
R
emove nut and save for next step.
27
Tighten keeper nut onto threaded
pipe from the light kit.
30
Replace the 3 screws removed and
tighten securely. Check motor for
shipping stabilizers and remove if
present.
19
Remove the all thread studs from the
lower part of the mounting bracket. Hang
fan from mounting bracket by the
hands free hook into a closed hole on
the edge of the Canopy. .
20
Hands free hook

   Find Your Products By Category