0
Owner's of the Sea Gull Lighting Fan Sea Gull Lighting Ceiling Fan gave it a score of 0 out of 5. Here's how the scores stacked up:
H
ang assembled fan from the mounting bracket
installed to ceiling in previous step. Make sure the
f
an is hanging straight. Rotate fan until the tab on
t
he Mounting bracket engages the slot on the
Downrod Ball. This must be done to prevent the fan
body from rotating when the blades are in motion.
7
Make wire connections to power source using wire
nuts provided. Make sure that no filiments are out-
s
ide of the wirenut. After making the wire connec-
t
ions, the wires should be spread apart with the
g
rounded conductor and the equipment-grounding
conductor on one side of the outlet box and
ungrounded conductor on the other side of the outlet
box.
9
Make sure the studs protruding from the
bottom of the Mounting bracket are
installed with threads all the way through
the bracket.
10
Pass leadwires through the canopy.
Flush Mount Installation
14
Lift Conopy allowing the 2 studs to
protrude through the canopy.
11
Next lift the cover ring and install knurled
nuts as shown. Tighten the knurled nuts
securely. The canopy should adjust for
any irregularity in the ceiling or Outlet
box.
12
Connect black and blue wire from fan to
Black or (Hot) wire from house. Connect
White wire from Fan to White (Neutral)
wire from house. Connect Ground leads
from mounting bracket and downrod to
Ground lead from house.
Refer to
Safety Tips section of manual.
8
Cover
Ring
House
Fan
Blue
Black
White
Green
Black
White
Ground
Remove side covers from canopy expos-
ing 4 holes. 2 closed holes and 2 open
“L
” shape holes.
15
“L” shape
slots
Install rubber pad between fan
body and canopy.
17
Remove every other screw as circled
and save for later use.
16
Place canopy over fan body
aligning holes.
18
For downrod
installation
Go to step 25
Find Your Products By Category
Please Login
