Sea Gull Lighting Fan Sea Gull Lighting Fan User Manual

0

Out of 0 Ratings

Owner's of the Sea Gull Lighting Fan Sea Gull Lighting Fan gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 5
 
© Copyright 2000, Sea Gull Lighting
3 - 1525-CUL-English
CH-545
Note:
After installation, please refer to operation, maintenance and troubleshooting sections
in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased
light kit,
please refer to the insert sheet titled: L
IGHT
K
IT
I
NSTALLATION
INSTALLATION
11
Fabric Washers
12
Shipping
Stabilizer
Tab
Attach blade brackets to blades
using the blade bracket screws and
washers provided.
Check the motor for plastic shipping
stabilizer tabs, and remove them if they are
present. Attach blade assembly to
motor using the motor screws and
washers provided. Tighten screws
securely.
WIRING OPTION WITH WALL SPEED CONTROL
9
Light Switch
Fan Switch
Wall
control
For control of fan and optional light from wall
location, follow diagram above. NOTE: A
professional electrician is recommended for
this type of installation. Ceiling fan is
suitable for use in wet locations when
installed in a GFCI protected branch
circuit (outdoor fans only).
8
*ATTACH BLUE WIRE
ONLY IF ATTACHING
LIGHT KIT WITH FAN
*
Secure with
twist-lock
wire
connectors
(included)
STANDARD WIRING OPTION
7
Carefully lift fan assembly onto
mounting bracket. Rotate fan so
that the notch on the ball engages
the ridge in the mounting bracket.
This will allow hands-free wiring.
Ridge
Ball
Notch
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
vary in color and may not include
ground wire. After wiring is conplete,
gently push wires into junction box with
wire nuts pointing upward.
10
Raise the canopy up and align the
four holes in the canopy with the
four holes in the hanger bracket.
Secure with screws provided.

   Find Your Products By Category