Sea Gull Lighting Fan Sea Gull Lighting Ceiling Fan User Manual

0

Out of 0 Ratings

Owner's of the Sea Gull Lighting Fan Sea Gull Lighting Ceiling Fan gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 6
 
Copyright 1998, Sea Gull Lighting Products, Inc.
Note:
After installation, please refer to operation, maintenance and troubleshooting sections in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased light kit,
please refer to the insert sheet titled: L
IGHT
K
IT
I
NSTALLATION
INSTALLATION
WIRING OPTION WITH WALL SPEED CONTROL
Wall
control
Light Switch
Fan Switch
8
For control of fan and optional light from wall
location, follow diagram above. NOTE: A
professional electrician is recommended
for this type of installation.
7
*ATTACH BLUE WIRE
ONLY IF ATTACHING
LIGHT KIT WITH FAN
*
Secure with
twist-lock wire
connectors
(included)
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
vary in color and may not include ground wire.
After wiring is conplete, gently push
wires into junction box with wire nuts
pointing upward. Refer to point 3 of
safety tips.
STANDARD WIRING OPTION
9
Raise the canopy up and align the two
holes in the canopy with the two holes in
the hanger bracket. Secure with two 5/
32 x 1/2" screws provided.
COMBO-BLADE
10
Combo-Blades feature two high quality
finishes on one blade. Select the one
that best complements your decor, or
change the style with just a flip of the
blade.
11
Fabric
Washers
Attach blade brackets to blades
using the blade bracket screws and
washers provided.
12
13
Check the motor for plastic shipping stabilizer
tabs, and remove them if they are
present. Attach blade assembly to motor
using the motor screws and washers
provided. Tighten screws securely.
Shipping
Stabilizer
Tab
14
After attaching blade; reinstall the
switch housing using the three screws
previously removed.
To gain access to the blade bracket
attachment holes remove the switch
housing cover by unscrewing the three
screws. Gently slide the cover off .

   Find Your Products By Category