Fanimation Fan Fanimation FP8042WH Cancun 42 Inch Ceiling Fan In Oil Rubbed Bronze User Manual

0

Out of 0 Ratings

Owner's of the Fanimation Fan Fanimation FP8042WH Cancun 42 Inch Ceiling Fan In Oil Rubbed Bronze gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 30
 
7
4. Lift your fan motor assembly and hang it from the
hanger bracket hook through one of the two screw
holes in the canopy lip. Do not use the grooved slots.
Connect your fan’s wiring according to how to wire
your ceiling fan in page 9 owner’s manual. (Figure 5)
6. Lift the fan off the hanger bracket hook and mount
your fan by sliding the ceiling canopy over the mounting
bracket with the two loosened screws going into the “L”
slots in the canopy. Be sure all wiring is tucked into
the ceiling canopy and is not pinched. Once the canopy
is flush with your ceiling, turn clockwise to seat the
screws into the keyed portion of the slot. Tighten the
screws. (Figure 7)
How to Assemble Your Ceiling Fan (Close to Ceiling)-Cont’d
Figure 5
Figure 7
Figure 8
Figure 9
Figure 6
OUTLET
BOX
HOOK
HANGER
BRACKET
MOTOR
ASSEMBLY
SLOT
SLOT
SCREW
SCREW
CANOPY
TRIM RING
DIMPLEP
GROOVE
MOUNTING
TAB(4)
HANGER
BRACKET
NOTE: MOTOR WIRES
HAVE BEEN OMITTED
FROM DIAGRAM
Install the remaining two screws 7. removed in step 5
to secure the ceiling canopy to the ceiling bracket.
(Figure 8)
8. Push the screw cover trim ring up to conceal the
screws, such that the mounting tabs seat into the
dimpled grooves in the ceiling canopy midway between
the screws. (Figure 9)
5. Completely remove one of each screw where on
the flap of hanger bracket, and keep for reinstall in
step 7. Loose the other two screws where the canopy
is “L” slotted. (Figure 6)

   Find Your Products By Category